所有結果 (579)

多功能感測器模組 Digital triaxial accelerometer and temperature sensor with MODBUS output; kit including cable, mounting stud, magnet mount, and screw mount

加速感測器模組 Side exit, general purpose, injection molded integral cable, 16 J9T2A, 100 mV/g, +/-5% sensitivity tolerance

加速計 Embedded accelerometer; 100 mV/g sensitivity, +/- 5 tolerance; 180 W power consumption, 60 A very low current draw, operates down to 3 VDC; TO5 standard housing, .36" x .38", 304L stainless steel case; weighs 3.2 grams

多導體 J9T2-1000 = 1,000 ft roll

加速感測器模組 Top exit 731A sensor and P31 low noise power/amplifier system with R6-2T-J9-10 cable. 1X, 10X, 100X selectable gain, low pass filter

加速感測器模組 Top exit, velocity output, case isolated, MIL-C-5015 connector, 500 mV/in/sec, +/-10% sensitivity tolerance

訊號調節 Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 500 mV/g accelerometer sensitivity, true RMS, velocity output, 1 ips full scale, 1-1

加速感測器模組 Top exit, general purpose, case isolated, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, Class I Div 1 certified intrinsically safe

振動感應器 Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 1.0 ips (25.4 mm/sec), MIL-C-5015 connector.

加速感測器模組 Side exit, high temperature 165C, general purpose, MIL-C-5015 connector, case isolated, 1/4-28 captive screw, 100 mv/g, +/-5% sensitivity tolerance

振動感應器 Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional Velocity, RMS, 1.0 ips (25.4 mm/sec), blunt cut cable, 4 meter PVC coated leads standard, add 25.00, up to 75 meters.

感應器線纜/致動器線纜 Same as above, 64