NID5100GW-Q100H

Nexperia
771-NID5100GW-Q100H
NID5100GW-Q100H

製造商:

說明:
熱插拔電壓控制器 SOT363 IDEAL DIODE CONTROLLER

壽命週期:
新產品:
該製造商的新產品。
ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 112

庫存:
112 可立即送貨
工廠前置作業時間:
14 週 工廠預計生產時間數量大於所顯示的數量。
此產品已報告長備貨期。
最少: 1   多個: 1
單價:
NT$-.--
總價:
NT$-.--
估計關稅:

Pricing (TWD)

數量 單價
總價
NT$11.47 NT$11.47
NT$7.85 NT$78.50
NT$6.99 NT$174.75
NT$6.02 NT$602.00
NT$5.56 NT$1,390.00
NT$5.27 NT$2,635.00
NT$5.02 NT$5,020.00
NT$4.70 NT$14,100.00
NT$4.59 NT$27,540.00

商品屬性 屬性值 選擇屬性
Nexperia
產品類型: 熱插拔電壓控制器
RoHS:  
Diode Controllers
5.5 V
1.2 V
- 40 C
+ 125 C
SMD/SMT
TSSOP-6
品牌: Nexperia
產品類型: Hot Swap Voltage Controllers
系列: NID5100
原廠包裝數量: 3000
子類別: PMIC - Power Management ICs
零件號別名: 935691945125
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

合規守則
CNHTS:
8542399000
CAHTS:
8541100090
USHTS:
8541100080
TARIC:
8541100000
ECCN:
EAR99
原產地分類
原產國:
馬來西亞
封裝原產國:
無資料
擴散國:
中國台灣
出貨時,國家可能會有所變更。

NID5100理想二極體

Nexperia NID5100 Ideal Diodes are designed for low-voltage systems that are unable to tolerate the high-voltage drops of conventional Schottky components. These diodes regulate the voltage between the IN and OUT pins when enabled and forward-biased, which results in a forward voltage drop. The NID5100 ideal diodes become reverse biased with very low leakage current when OUT voltage is higher than IN voltage. These diodes are a low-loss replacement for power OR-ing diodes and offer an automatic transition between OR-ed supplies. The NID5100 ideal diodes operate within the 1.2V to 5.5V voltage range and -40°C to 125°C temperature range. These diodes are available in a standard TSSOP6 (SOT363-2) with a 2.1mm x 1.25mm x 0.95mm body package compatible with industry SC88/SC70-6 packages providing a small PCB footprint. Typical applications include building automation, smart meters, and OR-ed primary and battery backup.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.