NCP81295MNTXG

Name: onsemi NCP81295MNTXG
Brand: onsemi
SKU: 863-NCP81295MNTXG
Price: 226.44 TWD
Availability: InStock

Mouser 編號：

863-NCP81295MNTXG

製造商編號：

NCP81295MNTXG

製造商：

onsemi

說明：

熱插拔電壓控制器 50A, Hotswap Controller with Internal MOSFET and IMON function

規格書:

NCP81295MNTXG 規格書

ECAD模型:

下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

更多資訊

瞭解更多關於onsemi NCP81295MNTXG的資訊

庫存量: 4,974

庫存：: 4,974 可立即送貨

發生意外錯誤了。請稍後再試。
工廠前置作業時間：: 23 週工廠預計生產時間數量大於所顯示的數量。

輸入數量：

最少： 1 多個： 1

單價:

NT$-.--

總價:

NT$-.--

估計關稅:

包裝:

完整捲（訂購多個2500）

帶狀裁切

MouseReel™ (+NT$215.00)

Pricing (TWD)

數量	單價	總價
零卷 / MouseReel™ ^†
	NT$226.44	NT$226.44
	NT$202.64	NT$2,026.40
	NT$174.42	NT$4,360.50
	NT$161.50	NT$16,150.00
	NT$146.88	NT$36,720.00
	NT$132.60	NT$66,300.00
	NT$123.76	NT$123,760.00
完整捲（訂購多個2500）
	NT$119.00	NT$297,500.00
5,000	報價

† NT$215.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	onsemi
產品類型:	熱插拔電壓控制器
REACH - SVHC:
產品:	Controllers & Switches
電流限制:	50 A
電源電壓 - 最大值:	18 V
電源電壓 - 最小值:	4.5 V
通道數:	1 Channel
運作供電電流:	70 mA
最低工作溫度:	- 40 C
最高工作溫度:	+ 125 C
安裝風格:	SMD/SMT
封裝/外殼:	LQFN-32
封裝:	Reel
封裝:	Cut Tape
封裝:	MouseReel
停電檢測:	No
品牌:	onsemi
輸入/電源電壓 - 最大值:	18 V
輸入/電源電壓 - 最小值:	4.5 V
濕度敏感:	Yes
產品類型:	Hot Swap Voltage Controllers
系列:	NCP81295
原廠包裝數量:	2500
子類別:	PMIC - Power Management ICs
每件重量:	1.558 g

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

篩選文檔:

規格書

NCP81295MNTXG 規格書

PCN

CNHTS:: 8542399000
CAHTS:: 8542390000
USHTS:: 8542390090
MXHTS:: 8542399999
ECCN:: EAR99

NCP81295 Hot-Swap Voltage Controller

onsemi NCP81295 Hot-Swap Voltage Controller is a 50A electronically re-settable in-line fuse for use in 12V and 50A high current applications. This hot-swap voltage controller offers a very low 0.65mΩ integrated MOSFET to reduce solution size and minimize power loss. The NCP81295 host-swap controller also integrates a highly accurate current sensor for monitoring and overload protection. Features include current limit after a delay, fast short-circuit protection, over-temperature shutdown, and excessive soft-start duration. This hot-swap voltage controller is suitable for servers, storage, and base stations.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up V_GS fault detection delay time, the transition V_DS fault detection delay time, and the continuous over-current V_DS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.