IS32LT3965-QWCLA3-TR

Lumissil
870-32LT3965QWCLA3TR
IS32LT3965-QWCLA3-TR

製造商:

說明:
LED照明驅動器IC 1.5-AMPERE PWM DIMMABLE SYNCHRONOUS BUCK LED DRIVER WITH LED THERMAL PROTECTION AND FAULT REPORTING, WFCQFN-14, (3mm4mm), T&R

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

供貨情況

庫存:
暫無庫存
工廠前置作業時間:
26 週 工廠預計生產時間。
此產品已報告長備貨期。
最少: 1   多個: 1
單價:
NT$-.--
總價:
NT$-.--
估計關稅:

Pricing (TWD)

數量 單價
總價
NT$63.58 NT$63.58
NT$46.92 NT$469.20
NT$42.84 NT$1,071.00
NT$38.08 NT$3,808.00
NT$35.70 NT$8,925.00
NT$34.68 NT$17,340.00
NT$33.29 NT$33,290.00
完整捲(訂購多個2500)
NT$33.25 NT$83,125.00

商品屬性 屬性值 選擇屬性
Lumissil
產品類型: LED照明驅動器IC
1 Output
Buck
20 mA
WFCQFN-14
38 V
3.8 V
200 kHz
5 V
- 40 C
+ 150 C
Reel
Cut Tape
品牌: Lumissil
調光: PWM
輸入電壓: 3.8 V to 38 V
安裝風格: SMD/SMT
通道數: 1 Channel
Pd - 功率消耗 : 2.33 W
產品: LED Drivers
產品類型: LED Lighting Drivers
原廠包裝數量: 2500
子類別: Driver ICs
電源電流 - 最大值: 1 mA
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

IS32LT3965 Synchronous Buck LED Driver

Lumissil IS32LT3965 Synchronous Buck LED Driver integrates high-side and low-side N-channel MOSFETs to operate in a buck configuration. This LED driver provides a constant current of up to 1.5A for driving single or multiple-series connected LEDs. The IS32LT3965 driver operates from a 3.8V to 38V input voltage range and a -40°C to 125°C temperature range. This LED driver operates up to 2.2MHz in fixed frequency mode during switching. The external resistor connected between the VCC and TON pins configures the on-time (switching frequency).

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.