MAX22210 Stepper Motor Driver

Analog Devices Inc. MAX22210 Stepper Motor Driver integrates two 36V, 3.8AMAX H-bridges. The H-bridge FETs have a very low impedance, resulting in high driving efficiency and minimal heat generated. The typical total RON (high side + low side) is 0.25Ω. The MAX22210 integrates an accurate, current drive regulation circuit and a 128-micro step built-in indexer controlled by a STEP/DIR interface. The high micro-stepping resolution and advanced control technique ensure smooth and quiet operation.

結果: 4
選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS ECAD模型 產品 類型 運作供電電流 最低工作溫度 最高工作溫度 安裝風格 封裝/外殼 封裝
Analog Devices / Maxim Integrated 電機/運動/點火控制器及驅動器 36V , 3.8A Dual Brushed/Single Stepper 411庫存量
最少: 1
倍數: 1

Half-Bridge Drivers 3.8 A - 40 C + 125 C SMD/SMT TSSOP-28 Tube
Analog Devices / Maxim Integrated 電機/運動/點火控制器及驅動器 36V , 3.8A Dual Brushed/Single Stepper 209庫存量
最少: 1
倍數: 1

Stepper Motor Controllers / Drivers 2 Phase 3.8 A - 40 C + 125 C SMD/SMT TQFN-32 Tray
Analog Devices / Maxim Integrated 電機/運動/點火控制器及驅動器 36V , 3.8A Dual Brushed/Single Stepper 無庫存前置作業時間 10 週
最少: 2,500
倍數: 2,500
: 2,500

Half-Bridge Drivers 3.8 A - 40 C + 125 C SMD/SMT TSSOP-28 Reel
Analog Devices / Maxim Integrated 電機/運動/點火控制器及驅動器 36V , 3.8A Dual Brushed/Single Stepper 無庫存前置作業時間 12 週
最少: 2,500
倍數: 2,500
: 2,500

2 Phase 3.8 A - 40 C + 125 C SMD/SMT TQFN-32 Reel