TPS92682QRHMRQ1

Texas Instruments
595-TPS92682QRHMRQ1
TPS92682QRHMRQ1

製造商：

說明：
LED照明驅動器IC Dual channel constan t-Voltage and const

規格書:
ECAD模型:
下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。
更多資訊
瞭解更多關於Texas Instruments TPS92682QRHMRQ1的資訊

庫存量: 1,151

庫存：
1,151 可立即送貨
工廠前置作業時間：
18 週 工廠預計生產時間數量大於所顯示的數量。
最少： 1   多個： 1
單價:
NT$-.--
總價:
NT$-.--
估計關稅:
包裝:
完整捲（訂購多個3000）

Pricing (TWD)

數量 單價
總價
零卷 / MouseReel™ †
NT$128.18 NT$128.18
NT$96.90 NT$969.00
NT$89.08 NT$2,227.00
NT$80.24 NT$8,024.00
NT$76.16 NT$19,040.00
NT$73.78 NT$36,890.00
NT$71.74 NT$71,740.00
完整捲（訂購多個3000）
NT$68.68 NT$206,040.00
† NT$215.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。 ↩

商品屬性 屬性值 選擇屬性
Texas Instruments
產品類型: LED照明驅動器IC
RoHS:  
2 Output
Boost, Buck, Flyback, SEPIC
5 A
VQFN-32
65 V
4.5 V
100 kHz to 700 kHz
Adjustable
TPS92682
- 40 C
+ 125 C
Adjustable Switch Frequency, Synchronization Pin, Thermal Shutdown
AEC-Q100
Reel
Cut Tape
MouseReel
品牌: Texas Instruments
開發套件: TPS92682EVM-070, TPS92682EVM-069
調光: PWM
輸入電壓: 4.5 V to 65 V
濕度敏感: Yes
安裝風格: SMD/SMT
通道數: 2 Channel
產品: LED Drivers
產品類型: LED Lighting Drivers
原廠包裝數量: 3000
子類別: Driver ICs
電源電流 - 最大值: 10 mA
類型: LED Lighting Driver
找到產品:
若要顯示類似商品，請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

此功能需要啟用JavaScript。

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542310030
TARIC:
8542399000
ECCN:
EAR99

TPS92682-Q1 Peak Current-Mode Controller

Texas Instruments TPS92682-Q1 Dual-Channel Peak Current-Mode Controller is programmable to operate in constant-voltage (CV) or constant-current (CC) modes. In CV mode, the TPS92682-Q1 can be programmed to operate as two independent or dual-phase boost voltage regulators. The output voltage can be programmed using an external resistor voltage divider and a SPI-programmable 8-bit DAC. In CC mode, the device is designed to support dual-channel step-up or step-down LED driver topologies. LED current can be independently modulated using analog or PWM dimming techniques. Analog dimming with over 28:1 range is obtained using a programmable 8-bit DAC. PWM dimming of LED current is achieved either by directly modulating the PWM input pins with the desired duty cycle or using an SPI-programmable 10-bit PWM counter. The optional PDRV gate driver output can drive an external P-Channel series MOSFET.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

發生意外的錯誤。


有問題嗎？ 請瀏覽幫助中心。
有關特定訂單的問題，請登入您的帳戶。

如有其他問題，請致電800-346-6873或發送郵件至 help@mouser.com 與我們聯絡。