R95C IO-Link Hubs

Banner Engineering R95C IO-Link Hubs enable the control and monitoring of discrete and/or analog signals by an IO-Link master. This allows the I/O to be located closer to devices, which reduces wiring complexity and time. The I/O types vary, depending on the model, and include NPN, PNP, 4mA to 20mA, and 0 to 10VDC. The hubs are designed to reduce programming at the programmable logic controller (PLC) as well as communication latency between devices. The devices also simplify I/O configurations and lower the number of SKUs needed. Banner Engineering R95C IO-Link Hubs help improve cable routing and increase installation options, and the stackable design enables multiple units to be mounted in an area, resulting in a smaller footprint.

結果: 4
選擇 圖像 零件編號
 製造商
說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。
數量 RoHS 類型
輸入類型
輸出類型
安裝風格
電源電壓 - 最小值
電源電壓 - 最大值
系列
Banner Engineering 訊號調節器和訊號轉換器 R95C Series: 8 Port Discrete IO-Link Hub; 16 Inputs or 8 Inputs/8 Outputs (Configurable); IO-Link Interface; 4-pin M12 QDs
規格書
5庫存量
最少： 1
倍數： 1

R95C
Banner Engineering 訊號調節器和訊號轉換器 R95C Series: 8 Port Hybrid IO-Link Hub; 4 Analog Inputs and 4 Analog Outputs and 8 Discrete Inputs or 8 Discrete Outputs (Configurable); IO-Link Interface; 4-pin M12 QDs
規格書
2庫存量
最少： 1
倍數： 1

Signal Converter Current, Voltage Current, Voltage In-Line 18 VDC 30 VDC R95C
Banner Engineering 訊號調節器和訊號轉換器 R95C Series: 8 Port Discrete IO-Link Hub; 16 Inputs or 16 Outputs (Configurable); IO-Link Interface; 4-pin M12 QDs
規格書
2庫存量
最少： 1
倍數： 1

Signal Converter Discrete IO-Link In-Line 30 VDC R95C
Banner Engineering 訊號調節器和訊號轉換器 R95C Series: 8 Port Analog IO-Link Hub; IO-Link Interface; 4-pin M12 QDs
規格書
無庫存前置作業時間 4 週
最少： 1
倍數： 1

Signal Converter Current, Voltage IO-Link In-Line 18 VDC 30 VDC R95C