R90C Converters

Banner Engineering R90C Converters feature gateway devices for connecting to a Snap Signal IIoT system or other Modbus RTU protocol control systems. The R90C converters are constructed with a 5-pin M12 male quick disconnect connector and four 4-pin M12 female quick disconnect connectors. The converters offer built-in indications for a Modbus RTU connection status and four IO-Link master ports. The Banner Engineering R90C Converters provide a rugged, over-molded design that meets IP65, IP67, and IP68 environmental standards. The R90C devices are ideal master converters for collecting and transmitting machine data, processing parameters, and gathering diagnostic information from IO-Link devices.

結果: 3
選擇 圖像 零件編號
 製造商
說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。
數量 RoHS 類型
輸入類型
輸出類型
安裝風格
電源電壓 - 最小值
電源電壓 - 最大值
系列
Banner Engineering 訊號調節器和訊號轉換器 R90C Series: 4-port Modbus to Analog Hub; RS-485 Interface; 4-pin M12 QDs
規格書
1庫存量
最少： 1
倍數： 1
Signal Converter Modbus Current, Voltage In-Line 18 VDC 30 VDC R90C
Banner Engineering 訊號調節器和訊號轉換器 R90C-4K-MQ 4-port IO-Link Master; Inputs: 4 IO-Link Devices; RS-485
規格書
5庫存量
最少： 1
倍數： 1
Signal Converter IO-Link Modbus In-Line 18 VDC 30 VDC R90C
Banner Engineering 訊號調節器和訊號轉換器 R90C Series: 4 Port Discrete IO-Link Hub; IO-Link Interface; 4-pin M12 QDs
規格書
3預期2026/2/24
最少： 1
倍數： 1
Signal Converter Discrete Bimodal Modbus In-Line 18 VDC 30 VDC R90C