TB9120AFTG(EL)

Toshiba
757-TB9120AFTGEL
TB9120AFTG(EL)

製造商:

說明:
電機/運動/點火控制器及驅動器 AEC-Q100 bipolar stepper motor driver 1.4A, 28-VQFN

ECAD模型:
下載免費的庫載入器,為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

庫存量: 5,931

庫存:
5,931 可立即送貨
最少: 1   多個: 1
單價:
NT$-.--
總價:
NT$-.--
估計關稅:
包裝:
完整捲(訂購多個2000)

Pricing (TWD)

數量 單價
總價
零卷 / MouseReel™
NT$126.14 NT$126.14
NT$95.20 NT$952.00
NT$87.38 NT$2,184.50
NT$78.88 NT$7,888.00
NT$74.80 NT$18,700.00
NT$72.08 NT$36,040.00
NT$70.04 NT$70,040.00
完整捲(訂購多個2000)
NT$64.60 NT$129,200.00
NT$63.92 NT$255,680.00
† NT$215.00 MouseReel™費用將加入您的購物車內並自動計算。所有MouseReel™訂單均不能取消和不能退換。

商品屬性 屬性值 選擇屬性
Toshiba
產品類型: 電機/運動/點火控制器及驅動器
RoHS:  
Stepper Motor Controllers / Drivers
2 Phase
2 A
3 mA
- 40 C
+ 125 C
SMD/SMT
VQFN-28
AEC-Q100
Reel
Cut Tape
MouseReel
品牌: Toshiba
額定負載電壓: 4.5 V to 18 V
輸出數: 4 Output
Pd - 功率消耗 : 3.9 W
產品類型: Motor / Motion / Ignition Controllers & Drivers
原廠包裝數量: 2000
子類別: PMIC - Power Management ICs
電源電壓 - 最大值: 18 V
電源電壓 - 最小值: 7 V
找到產品:
若要顯示類似商品,請選取至少一個核選方塊
至少選中以上一個核取方塊以顯示在此類別中類似的產品。
所選屬性: 0

                        
Toshiba Electronic Devices & Storage Corporation Automotive products
may be used as engineering samples, however; they are not intended for
volume automotive production or reliability testing without prior
approval by Toshiba Semiconductor and Storage.
Please contact a Mouser Technical Sales Representative for
further assistance.
5-0320-2

USHTS:
8542390090
ECCN:
EAR99

符合AEC-Q100標準的馬達控制裝置

Toshiba符合AEC-Q100標準的馬達控制裝置是預驅動器IC、半橋驅動器及閘極驅動器產品組合,適用於汽車無刷馬達及有刷馬達。這些裝置安置于小型封裝中,設計用於大電流應用,如電動助力轉向(EPS)。有刷電機驅動器能夠控制汽車發動機的油門及其他氣門。無刷馬達透過一個正弦波電流來驅動發動機平穩安靜運行。

TB9120AFTG Automotive Stepping Motor Driver

Toshiba TB9120AFTG Automotive Stepping Motor Driver is a constant current, 2-phase, bipolar stepping motor driver with a clock input interface and a PWM constant-current control system. Using stepping motors, the Toshiba TB9120AFTG driver is suited to various automotive and general applications. The AEC-Q100 component uses a wettable flank QFN package with excellent solderability. An advanced functional MCU or dedicated software is not required. Less motor noise and smoother control are achieved, supporting full-step to 1/32-step selectable excitation mode. The PWM constant-current control allows stable output waveforms in mixed decay mode. Upon detecting a stall, a stall detection signal will be received by a microcontroller and fed back into the system.

步進馬達驅動器IC

Toshiba步進馬達驅動器IC透過採用主動增益控制 (AGC) 與高階動態混合衰減 (ADMD),克服了常見的應用挑戰。步進馬達驅動器廣泛用於精確位置控制。然而,步進馬達通常需要高電流作業,以最大限度提高速度,並防止PWM關閉期間出現停滯或快速電流衰減。這可能會導致噪音和振動問題。設計人員正在尋求最佳化的控制解決方案。AGC和ADMD解決了這些問題,並在大多數Toshiba的步進馬達控制器產品中實施。