Marki Microwave 射頻與無線裝置

射頻與無線裝置類型

變更類別視圖
結果: 589
選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS
Marki Microwave RF混合器 The MM1-0312SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
25預期2026/3/20
最少: 1
倍數: 1

Marki Microwave RF混合器 The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
50預期2026/4/10
最少: 1
倍數: 1

Marki Microwave RF混合器 The MM1-0626HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
100預期2026/3/13
最少: 1
倍數: 1

Marki Microwave RF混合器 The MM1-0626SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
50預期2026/4/10
最少: 1
倍數: 1

Marki Microwave RF混合器 A broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB.
25預期2026/4/10
最少: 1
倍數: 1

Marki Microwave RF混合器 The MMIQ-0218LSM is a broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz.
25預期2026/4/10
最少: 1
倍數: 1

Marki Microwave RF混合器 The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.
10預期2026/5/22
最少: 1
倍數: 1

Marki Microwave RF放大器 A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
20預期2026/2/25
最少: 1
倍數: 1

Marki Microwave RF放大器 The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
10預期2026/2/25
最少: 1
倍數: 1

Marki Microwave RF放大器 A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity. 無庫存前置作業時間 10 週
最少: 1
倍數: 1

Marki Microwave RF放大器 A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. 無庫存前置作業時間 10 週
最少: 1
倍數: 1

Marki Microwave RF放大器 A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF放大器 A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. 無庫存前置作業時間 10 週
最少: 25
倍數: 25

Marki Microwave RF 轉接器 - 串聯 The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1

Marki Microwave RF 轉接器 - 系列間 The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1
Marki Microwave RF 轉接器 - 串聯 The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1
Marki Microwave RF 轉接器 - 系列間 The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1
Marki Microwave RF 轉接器 - 串聯 The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1

Marki Microwave RF 轉接器 - 串聯 The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended. 無庫存前置作業時間 12 週
最少: 1
倍數: 1