所有結果 (377)

選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS
Marki Microwave 訊號調節 The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
3預期2026/9/11
最少: 1
倍數: 1

Marki Microwave 訊號調節 The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
1在途量
最少: 1
倍數: 1

Marki Microwave 訊號調節 A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
1預期2026/9/1
最少: 1
倍數: 1

Marki Microwave 訊號調節 This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
1預期2026/8/31
最少: 1
倍數: 1

Marki Microwave 訊號調節 The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
1預期2026/12/15
最少: 1
倍數: 1

Marki Microwave 訊號調節 A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
1預期2027/1/8
最少: 1
倍數: 1

Marki Microwave 訊號調節 A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
1預期2026/10/2
最少: 1
倍數: 1

Marki Microwave 訊號調節 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
1預期2026/12/24
最少: 1
倍數: 1

Marki Microwave 訊號調節 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
1預期2026/11/13
最少: 1
倍數: 1

Marki Microwave RF 開發工具 The EVAL-MT3H-0113H is a connectorized evaluation board for the MT3H-0113HSM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer. 無庫存前置作業時間 2 週
最少: 1
倍數: 1

Marki Microwave RF 開發工具 The EVB-MDPX-0305P is a connectorized evaluation board for the MDPX-0305PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals. 無庫存前置作業時間 2 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet housing. 無庫存前置作業時間 12 週
最少: 1
倍數: 1

Marki Microwave RF混合器 The MM1-0832LSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-0832LSM is a high frequency X band mixer that works well as both an up and down converter through Ka band. 無庫存前置作業時間 10 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave 訊號調節 A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave RF 轉接器 - 串聯 The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. 無庫存前置作業時間 18 週
最少: 1
倍數: 1

Marki Microwave RF 轉接器 - 系列間 The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended. 無庫存前置作業時間 18 週
最少: 1
倍數: 1
Marki Microwave RF 轉接器 - 串聯 The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended. 無庫存前置作業時間 18 週
最少: 1
倍數: 1