SparkFun 感測器

結果: 174
選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS
SparkFun 光學感測器開發工具 Ambient Light Sensor B/O TEMT6000 131庫存量
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 16 Output I/O Expan B/O SX1509 47庫存量
58預期2026/9/9
最少: 1
倍數: 1

SparkFun 溫度感測器開發工具 LilyPad Temperature Sensor 13庫存量
最少: 1
倍數: 1

SparkFun 加速感測器開發工具 LilyPad ACCLRM ADXL335 7庫存量
最少: 1
倍數: 1

SparkFun 光學感測器開發工具 The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied o 18庫存量
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th 44庫存量
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li 10庫存量
43預期2026/8/28
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 5庫存量
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we've carried the micro:climate kit includes our tried-and-true Weather Meters and Soil Moisture Sensor 2庫存量
最少: 1
倍數: 1
SparkFun 光學感測器開發工具 This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3 34庫存量
最少: 1
倍數: 1

SparkFun 板機接口移動感應器和位置傳感器 This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage 19庫存量
最少: 1
倍數: 1
SparkFun 加速感測器開發工具 Triple Axis ACCLRM B/O ADXL335 46庫存量
58在途量
最少: 1
倍數: 1

SparkFun 壓力感測器開發工具 This is a force sensitive resistor with a round 0.5" diameter sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is b 114庫存量
最少: 1
倍數: 1

SparkFun 空氣品質感應器 This is a simple-to-use compressed natural gas (CNG) sensor suitable for measuring natural gas (mostly methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations ranging from 200 to 10000 ppm.This sensor has a high se 23庫存量
最少: 1
倍數: 1
SparkFun 溫度感測器開發工具 IR Thermometer Eval Board MLX90614 5庫存量
最少: 1
倍數: 1

SparkFun 加速感測器開發工具 We've been using and selling Analog Devices' ADXL accelerometers for a good while now and now we've found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power co 36庫存量
最少: 1
倍數: 1

SparkFun 多功能感測器開發工具 RedBot Sensor Line Follower 50庫存量
最少: 1
倍數: 1

SparkFun 電流感測器開發工具 The INA169 is a high-side current monitor which means that you place a resistor (a shunt resistor ) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the 30庫存量
最少: 1
倍數: 1

SparkFun 觸摸傳感器開發工具 If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is 47庫存量
最少: 1
倍數: 1

SparkFun 光學感測器開發工具 RGB Light Sensor - ISL29125 18庫存量
最少: 1
倍數: 1

SparkFun 溫度感測器開發工具 TC Breakout - MAX31855K 7庫存量
最少: 1
倍數: 1

SparkFun 電流感測器開發工具 Current Sensor Breakout - ACS723 91庫存量
最少: 1
倍數: 1
SparkFun 磁感測器開發工具 It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields 55庫存量
最少: 1
倍數: 1

SparkFun 溫度感測器開發工具 Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array meaning you have a square array of 64 pixels capable of independent temperature detection. It s like having a thermal cam 4庫存量
最少: 1
倍數: 1

SparkFun 板上安裝溫度感測器 The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of 0.1 C across the temperature range of -20 C to +50 Cs with no calibration and a maxi 66庫存量
最少: 1
倍數: 1