SparkFun 工具及耗材

結果: 1,017
選擇 圖像 零件編號
 製造商
說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。
數量 RoHS
SparkFun SparkFun配件 The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
規格書
54庫存量
最少： 1
倍數： 1
否
SparkFun PCB 夾具 Give your arms a rest! Stickvise holds your circuit board flat so you can solder with stability at table level. These flat PCB holders are great because your hands can rest directly on the table for fine soldering and probing. They also fit easily un 30庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The cable features a 1.25mm pitch GHR-06V 'locking' JST connector commonly found on some sensors radios and other small devices. 355庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 This is a 50mm long ESLOV to ESLOV cable. The ESLOV connector has five pins (one more than standard I2C) for automatically configuring the module and handling the sleeping states to boost battery life. Use this cable to connect two ESLOV boards toget
規格書
69庫存量
最少： 1
倍數： 1
SparkFun 教育套件 If you do anything with electronics you re probably already using transistors but you re probably using them in large prepackaged clusters of just one type. The SparkFun Discrete Semiconductor Kit addresses your needs of only needing one or a 5庫存量
最少： 1
倍數： 1
SparkFun 教育套件 LilyPad Sewable Electronics Kit 5庫存量
最少： 1
倍數： 1


SparkFun 教育套件 The great thing about open source is that while SparkFun has designed our own MicroMod carrier boards that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes five M.2 connectors (4.2mm height) 11庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 This is a very handy magnetic mount for survey grade GNSS/GPS antennas. Sturdy compact and surprisingly strong this is a quick way of mounting your antenna to metal roofs parapets and other ferrous materials. The rod is threaded 5/8" 11-TPI (thr 28庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa 109庫存量
最少： 1
倍數： 1
SparkFun 教育機械人套件 This is a 12 wire slip ring a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly you'd find slip rings in wind turbines radar antennae or anything else that requires con
規格書
42庫存量
最少： 1
倍數： 1
SparkFun 教育機械人套件 This is the Micro Gripper Kit B a simple robotics kit that is great for "getting a grip" on smaller robotics projects! Designed for use with any sub-micro size Hitec servo the gripper kit is easy to assemble and requires only a Phillips Head Screwd 5庫存量
最少： 1
倍數： 1
SparkFun 教育機械人套件 These are a pair of basic 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you will be able to get almost any be 26庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 Tidy up your workspace and keep your soldering tip in peak condition with this handy Soldering Stand and Brass Sponge combo. The weighted base holds your iron securely while the integrated brass sponge cleans excess solder with every rest. No more f 11庫存量
17預期2026/8/25
最少： 1
倍數： 1
SparkFun SparkFun配件 A wire stripper is an essential tool for any electronics work bench and this multi-purpose stripper and cutter makes removing protective covers easy. This wire stripper and cutter works with six standard wire sizes from 20 to 30 AWG. It has curved 6庫存量
最少： 1
倍數： 1
SparkFun SparkFun配件 A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port. It features up to USB 3.1 speeds. 1,005庫存量
最少： 1
倍數： 1
否
SparkFun PRT-17260
SparkFun SparkFun配件 This is a 50mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
規格書
1,404庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 There are a lot of different development boards requiring different input voltages. The SparkFun Power Supply Sample Kit provides you with a sampling of the power supplies that we offer to power your next project. Included in this kit are four differ 7庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 SOIC to DIP Adapter - 20-Pin 82庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 SOIC to DIP Adapter - 28-Pin 8庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to 0.6 23庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 SSOP to DIP Adapter - 28-Pin 6庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 RJ45 Breakout 324庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 Breakout Board for XBee Module 98庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 Thumb Joystick Breakout
規格書
44庫存量
最少： 1
倍數： 1

SparkFun SparkFun配件 This simple breakout board makes it easy to use our LED tactile switches in a breadboard or your next project.Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed
規格書
13庫存量
最少： 1
倍數： 1