TE Connectivity / DEUTSCH DTHD連接器

TE Connectivity (TE) DEUTSCH DTHD電源插頭為單一端子連接器，係針對需要完整環境密封的單一電路端子應用所開發。TE DTHD插頭採用一體式接合卡榫，在接合時可提供觸覺與聲響的回饋。強固型熱塑性塑膠插座設計為用於纜線對纜線應用的內嵌式插座，採用一體式V型槽，可使用固定夾、支架及凸緣。壓接型實心接點提供4、8，及12尺寸，分別可使用AWG6、AWG8、AWG10、AWG12，及14尺寸的電線。

特點

1500V_AC下漏電流低於2mA
-55°C至+125°C作業溫度範圍
提供4 (100A)、8 (60A) 和12 (25A) 接點尺寸
6AWG至14AWG

1膜腔配置
內嵌式或凸緣固定
圓形熱塑性塑膠外殼
一體式插配卡榫

規格

-55°C to +125°C operating temperature range, continuous at rated current
No electrical or mechanical defects after 100 cycles of engagement and disengagement
Vibration:
- No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20G’s at 10 to 2000Hz in each of the three mutually perpendicular planes
- No electrical discontinuities longer than 1 microsecond
Physical shock:
- No unlocking, unmating, or other unsatisfactory result during or after 50G’s in each of three mutually perpendicular planes
- No electrical discontinuities longer than 1 microsecond
- MIL-STD 202, method 213, Condition “C”

Fluid resistance with connectors shows no damage when exposed to most fluids used in industrial applications
1000megohms insulation resistance minimum at 25°C
Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage
Current leakage less than 2milliamps at 1500V_AC dielectric withstanding voltage
Thermal cycle with no cracking, chipping, or leaking after 20 test cycles