Analog Devices Inc. MAXM17712/20/24 PMICs

Analog Devices Inc. MAXM17712/20/24 Power Management Specialized ICs (PMICs) are Himalaya micro System-Level IC (µSLIC) power modules that enable cooler, smaller, and simpler power supply solutions. These ICs integrate a high-efficiency 150mA synchronous step-down DC-DC converter and a high PSRR, low noise, and 50mA linear regulator into µSLIC™ power modules. The PMICs operate over a wide input voltage range of 4V to 60V. The step-down converter and the linear regulator can deliver output currents up to 150mA and 50mA.

The output of the DC-DC converters serves as the input to the linear regulators. These linear regulators offer fixed output voltages between 1.2V and 3.3V in different modules. The MAXM17712/20/24 modules are available in a low profile and 2.6mm x 3mm x 1.5mm µSLIC package. Typical applications include industrial sensors, HVAC and building control, battery-powered equipment, and LDO replacement.

Features

  • Easy to use:
    • Wide 4V to 60V input step-down converter
    • Adjustable and fixed output voltage modules
    • Internal inductor and compensation
    • Up to 150mA output current from a step-down converter
    • ±1.3% accuracy for linear regulator output and ±2% FB accuracy for step-down converter
    • All-ceramic capacitors, compact layout
    • Built-in 50mA high PSRR linear voltage regulator
  • High efficiency:
    • Selectable PWM or PFM mode operation
    • PFM enables enhanced light-load efficiency
    • 2.5µA shutdown current
    • 70µA no-load supply current
  • Rugged:
    • Complies with CISPR22(EN55022) Class B conducted and radiated emissions
    • Passes JESD22-B103 / B104 / B111 drop, shock, and vibration standards
  • Flexible design:
    • Internal soft-start and pre-bias startup
    • 350kHz to 2.2MHz adjustable switching frequency
    • Open-drain power-good output (RESET Pin)
    • Programmable EN/UVLO threshold
  • Robust operation:
    • Hiccup overcurrent protection
    • Overtemperature protection
    • -40°C to +125°C ambient operating temperature range
    • -40°C to +150°C junction temperature range

Applications

  • Industrial sensors
  • Programmable logic controller
  • Battery-powered equipment
  • HVAC and building control
  • LDO replacement

Block Diagram

Block Diagram - Analog Devices Inc. MAXM17712/20/24 PMICs

Videos

發佈日期: 2020-01-28 | 更新日期: 2024-04-18