Banner Engineering DX700ER Ethernet Data Radios
Banner Engineering DX700ER Ethernet Data Radios feature a DIN-rail-mountable design, ideal for provisioning and diagnostics in industrial networks. While both models operate on 10VDC to 30VDC, the DX700ER2M-H is built for the 2.4GHz ISM band, and the DX700ER9M-H is for the 900MHz ISM band. These radios include an onboard LCD for setup and status monitoring and feature an external antenna connector, allowing the radio to be mounted inside a protected enclosure. The LCD screen shows real-time signal strength, link quality, and network status, enabling validation and commissioning without a laptop or software. Banner Engineering DX700ER Ethernet Data Radios are suitable for use in industrial environments where enclosure placement can affect signal quality.
Features
- MultiHop Ethernet data radio
- Star or tree network topology configuration
- Frequency-hopping spread spectrum (FHSS) technology ensures reliable data delivery
- DIP switch operational mode selection
- Traffic diagnostics
- Onboard site survey
- Rapid assessment of a location’s RF transmission properties
- No IP address configuration required
- Self-healing, auto-routing radio frequency network with multiple hops to extend network range
- Advanced encryption standard (AES) using 256-bit cryptographic key
Specifications
- 900MHz or 2.4GHz ISM band
- 10VDC to 30VDC supply voltage
- External antenna
- LCD screen
- RJ45 jack Ethernet connector type
- NEMA 4X rating
- IP10 protection rating
- -40°C to +85°C operating temperature range
Front and Back Views
