Digilent Zmod ADC 1410 Module
Digilent Zmod ADC 1410 Module is an SYZYGY™-compatible dual-channel, 14-bit, analog-to-digital converter module. Zmod Peripheral Modules are designed to fill the gap between low-speed, low pin-count Digilent Pmod™ devices and high-performance, high pin-count VITA 57.1 FMC peripherals. Driven by the SYZYGY carrier, the Zmod ADC 1410 Module can simultaneously acquire two ±25V signals with 14 bits of resolution at a sample rate of up to 100MS/s. Analog inputs can be connected to a circuit using SMA cables.
When coupled to a baseboard using SYZYGY expansion, such as the Eclypse Z7 or Genesys ZU, the combination will be a powerful prototyping platform for instrumentation, high-speed control, and SDR products. By utilizing the expansion capabilities of Digilent ADC 1410 Modules, more time can be spent on the analytical and system-level aspects of the solutions rather than focusing on the component-level interactions of the devices.
Features
-
2 channels
-
Single-ended channel type
-
14-bit resolution
-
±1V (Low Range) or ±25V (High Range) input range
-
0.13mV (Low Range) or 3.21mV (High Range) absolute Resolution
-
±0.2% (of range) accuracy
-
100MS/s (real time) sample rate
-
1MΩ||18pF input impedance
-
70MHz+ at 3dB, 30MHz at 0.5dB, 20MHz at 0.1dB analog bandwidth
-
±50V protected input
Technical Documents
Related Products
Digilent Zmod SDR Analog-to-Digital Converter Module
Designed to be used with any SYZYGY™ compatible carrier board.
Digilent Genesys ZU Zynq UltraScale+MPSoC Development Board
Prototyping and evaluation board based on the Xilinx Zynq UltraScale+ 3EG and 5EV MPSoC devices.
Digilent Eclypse Z7 Development Board
Powerful prototyping platform featuring the Xilinx Zynq®-7000 All Programmable System-on-Chip.
Digilent Zmod DAC 1411 Module
Add-on DAC board conforming to the SYZYGY specification, ideal for FPGA and SoC host boards.
Digilent USB104 A7 Artix®-7 FPGA PC/104開發板
PC/104開發板，基於Xilinx Artix-7 XC7A100T FPGA。
Block Diagram
