onsemi T30HM1TS2500 Automotive Ethernet Transceiver
onsemi T30HM1TS2500 Automotive Ethernet Transceiver is IEEE 802.3cg compliant and integrated with a media access controller (MACPHY). This transceiver is a next-generation 10BASE-T1S device capable of communicating with multiple nodes connected to a shared medium at 10Mbps. Collisions at the physical layer are prevented due to the physical layer collision avoidance (PLCA) with CSMA/CD MAC and PHY, improving the throughput of CSMA/CD. onsemi T30HM1TS2500 Automotive Ethernet Transceiver is suitable for both automotive and industrial applications.
Features
- Supports half-duplex, multi-drop mode
- Physical layer collision avoidance (PLCA)
- SPI interface (OPEN alliance 10BASE-T1x MACPHY interface)
- Topology discovery (TC14 compliant)
- Sleep/wake (TC10 compliant)
- Local wake-up input
- Local wake forward
- Inhibit output for voltage regulator control
- Time stamping (TC6 compliant)
- Capture and compare modules
- Signal quality index (SQI)
- Harness defect detection (HDD)
- PLCA diagnostic
- Coordinator redundancy
- VBAT pin for inhibit and sleep mode power supply
Applications
- Automotive
- Industrial
Specifications
- Compliant with IEEE 802.3cg 2019
- 3.3V single supply operation possibility
- -40°C to +150°C operating temperature range
- Lead-free devices
- MDI pins protected against
- ±6kV ESD (HBM, IEC61000−4−2)
- Transient pulses (ISO7637)
Block Diagram
發佈日期: 2024-11-13
| 更新日期: 2024-11-14