返回至Texas Instruments

Texas Instruments TPS7H2211 Single Channel eFuse

Texas Instruments TPS7H2211 Single Channel eFuse includes an integrated FET load switch with additional features to provide reverse current protection, overvoltage protection, and a configurable rise time to minimize soft start and inrush current. The device contains P-channel MOSFETs that support a maximum continuous current of 3.5A and operate over an input voltage range of 4.5V to 14V.

The switch is controlled by an on-and-off input (EN), which can interface directly with low-voltage control signals. Overvoltage protection and soft start can be programmable with a few external components through the OVP and SS pins. The Texas Instruments TPS7H2211 is available in a plastic and ceramic package with an exposed thermal pad, allowing for improved thermal performance.

Features

  • Total ionizing dose (TID) characterized to 100krad (Si) with radiation hardness assurance availability of 100krad (Si)
  • Single-event effects (SEE) characterized
    • Single-event latch-up (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeVcm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized to LET = 75MeVcm2/mg
  • Integrated single-channel eFuse
  • Low on-resistance (RON) of 60mΩ maximum at 25°C and VIN = 12V
  • 4.5V to 14V input voltage range
  • 3.5A maximum continuous switch current
  • Low control input threshold aids in use of 1.2V, 1.8V, 2.5V, and 3.3V logic
  • Configurable rise time (soft start)
  • Reverse current protection (RCP)
  • Overvoltage protection (OVP)
  • Internal current limit (fast-trip)
  • Thermal shutdown
  • Ceramic and plastic package with thermal pad

Applications

  • Satellite electrical power system (EPS)
  • Cold-sparing power supplies (redundancy)
  • Command and data handling
  • Communications payload
  • Radiation-hardened and tolerant power tree

Additional Resources

Videos

Simplified Schematic

Schematic - Texas Instruments TPS7H2211 Single Channel eFuse

Related Development Tools

Texas Instruments TPS7H2211EVM eFuse Evaluation Module (EVM)

This module demonstrates the operation of a single TPS7H2211 eFuse space-enhanced product.

Learn More關於Texas Instruments TPS7H2211EVM eFuse Evaluation Module (EVM) View Products與Texas Instruments TPS7H2211EVM eFuse Evaluation Module (EVM)相關

Texas Instruments TPS7H2211EVM-CVAL Load Switch Evaluation Module

The evaluation module is designed to help evaluate the TPS7H2211-SP, a single-channel load switch.

Learn More關於Texas Instruments TPS7H2211EVM-CVAL Load Switch Evaluation Module View Products與Texas Instruments TPS7H2211EVM-CVAL Load Switch Evaluation Module相關
發佈日期: 2024-10-08 | 更新日期: 2024-10-15