TPS2412PWG4

影像僅供參考
請參閱產品規格

Mouser 編號：

595-TPS2412PWG4

製造商編號：

TPS2412PWG4

製造商：

Texas Instruments

說明：

熱插拔電壓控制器 N+1 and OR-ing Pwr Rail Controller

壽命週期:

作廢

規格書:

TPS2412PWG4 規格書

ECAD模型:

下載免費的庫載入器，為ECAD工具轉換此文件。瞭解更多關於 ECAD 型號的資訊。

航運提示：

Mouser目前不在您的地區出售本產品。

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

商品屬性	屬性值	選擇屬性
製造商:	Texas Instruments
產品類型:	熱插拔電壓控制器
付運限制：	Mouser目前不在您的地區出售本產品。
RoHS:
產品:	Controllers & Switches
電源電壓 - 最大值:	16.5 V
電源電壓 - 最小值:	800 mV
通道數:	1 Channel
運作供電電流:	1.2 mA
最低工作溫度:	- 40 C
最高工作溫度:	+ 85 C
安裝風格:	SMD/SMT
封裝/外殼:	TSSOP-8
封裝:	Tube
停電檢測:	No
品牌:	Texas Instruments
開發套件:	TPS2412EVM
Pd - 功率消耗 :	250 mW
產品類型:	Hot Swap Voltage Controllers
系列:	TPS2412
原廠包裝數量:	150
子類別:	PMIC - Power Management ICs
每件重量:	39 mg

找到產品:

若要顯示類似商品，請選取至少一個核選方塊

至少選中以上一個核取方塊以顯示在此類別中類似的產品。

所選屬性: 0

                        
The G4 and E4 suffixes were added for ROHS conversion.  The
G4 and E4 parts are exactly the same as the original parts
without the G4 or E4 suffix.

For lead-frame-based devices, the RoHS-compliant solution
is backward-compatible with lead-based processes; so the
same part is shipped regardless of whether a unique part
number or a standard part number is ordered.

Lead-frame-based unique part numbers will consist of the
standard part number plus a two-character suffix (usually
E4 or G4, sometimes E3, E6, G3 or G6).

"E" = RoHS-compliant

"G" = Green (RoHS-compliant and no Br/Sb)

Please contact a Mouser Technical Sales Representative for
further information.


5-1011-9

篩選文檔:

合規守則

CNHTS:: 8542319000
CAHTS:: 8542330000
USHTS:: 8542390090
JPHTS:: 8542330996
KRHTS:: 8532331000
MXHTS:: 8542330299
ECCN:: EAR99

原產地分類

原產國:: 馬來西亞
封裝原產國:: 無資料
擴散國:: 無資料

出貨時，國家可能會有所變更。

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up V_GS fault detection delay time, the transition V_DS fault detection delay time, and the continuous over-current V_DS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.