排序:
目錄按結果計數排序。
結果: 1,945
選擇 圖像 零件編號 製造商 說明 規格書 供貨情況 定價 (TWD) 基於數量按單價篩選表中結果。 數量 RoHS
SparkFun SparkFun配件 7-Segment Serial Display - Blue 33庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED " 40庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur 20庫存量
30預期2026/9/1
最少: 1
倍數: 1
SparkFun SparkFun配件 We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t 48庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is 77庫存量
165預期2026/10/23
最少: 1
倍數: 1
SparkFun SparkFun配件 This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set 101庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 LED RGB Strip Addressable, 1m 2庫存量
20預期2026/8/31
最少: 1
倍數: 1

SparkFun SparkFun配件 You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it 3庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 These are the sturdy little stomp switches that you find on guitar effects pedals. They re 3PDT (three-pole double-throw) type switches. These switches allow you to modify your effects for true bypass and lets you wire a status indicator LED. This 24庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad Button Board 93庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad Slide Switch 10庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o 19庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 Arduino ProtoShield- Bare PCB 24庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad Coin Cell Battery Holder 20mm 195庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED White (5pcs) 18庫存量
40預期2026/8/28
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Rainbow (6 colors) 19庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Pink (5pcs) 13庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Green (5pcs) 53庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Blue (5pcs) 10庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Red (5pcs) 74庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 LilyPad LED Yellow (5pcs) 12庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 SparkFun Qwiic Shield for Arduino 24庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw 440庫存量
最少: 1
倍數: 1

SparkFun SparkFun配件 The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi 2庫存量
最少: 1
倍數: 1
SparkFun SparkFun配件 The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark 6庫存量
最少: 1
倍數: 1