所有結果 (1,667)

SparkFun配件 This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter

SparkFun配件 BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m

SparkFun配件 These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet

SparkFun配件 You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFun配件 These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha

SparkFun配件 This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your

SparkFun配件 This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f

SparkFun配件 Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht

SparkFun配件 Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial

SparkFun配件 The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in

SparkFun配件 This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu

SparkFun配件 Jumper - 2 Pin