返回至MYIR

MYIR MYC-YF13X CPU & SOM Modules

MYIR MYC-YF13X CPU and System-On-Modules measure 37mm x 39mm and are built around the powerful ST STM32MP135 processor (STM32MP135DAF7). The MYIR MYC-YF13X has an onboard DDR3L, Nand Flash or eMMC, and a 32Kbit EEPROM. The module offers exceptional functionality within its tiny form factor. Its 1.0mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface provides access to a diverse range of peripheral and IO signals.

Features

  • 32-bit Arm® Cortex®-A7 1GHz CPU 
  • External storage:
    • Up to LPDDR2/LPDDR3-1066 16-bit
    • Up to DDR3/DDR3L-1066 16-bit
    • Dual Quad-SPI memory interface
    • Parallel interface to connect external ICs and SLC NAND memories with up to 8-bit ECC, 16-bit data bus
  • Video engine:
    • Video encoder/decoder support
    • Up to WXGA (1366 x 768) at 60fps or up to full HD (1920 x 1080) at 30fps
    • Pixel clock up to 90MHz
    • Two layers (including one secured) with programmable color
  • Analog peripheral:
    • 2 ADCs with 12-bit maximum resolution up to 5Msps
    • 1 x temperature sensor
    • 1 x Digital Filter for Sigma-Delta Modulator (DFSDM) with four channels and two filters
    • Internal or external ADC reference VREF+
    • RTC64MHz HSI oscillator, 4MHz CSI oscillator, and 32kHz LSI oscillator internal oscillators
    • 8MHz to 48MHz HSE oscillator, 32.768kHz LSE oscillator external oscillators
    • 4 x PLLs with fractional mode
  • Safety engine:
    • TrustZone® peripherals, 12x tamper pins including 5x active tampers
    • Temperature, voltage, frequency, and 32kHz monitoring
  • Controller:
    • 56 physical channels in total
    • 1 x high-speed general-purpose Master Direct Memory Access (MDMA) controller 
    • 3 x dual-port DMAs with FIFO and request router capabilities for optimal peripheral management
  • Connection:
    • 5 x I2C FM+ (1Mbit/s, SMBus/PMBus)
    • 4 x UART + 4 x USART (12.5Mbit/s, ISO7816 interface, LIN, IrDA, and SPI slave)
    • 5 x SPI (50Mbit/s, including 4 with full-duplex I2S audio class accuracy via internal audio PLL or external clock)
    • 2 x SAI (I2S, PDM, and SPDIF Tx stereo audio)
    • SPDIF Rx with four inputs
    • 2 x SDMMC up to 8-bits (SD/eMMC/SDIO)
    • 2 x CAN controllers supporting CAN FD protocol
    • 2 x USB 2.0 high-speed Host - or 1 x USB 2.0 high-speed Host +1 x USB 2.0 high-speed OTG simultaneously
    • 2 x Ethernet MAC/GMAC - IEEE 1588v2 hardware, MII/RMII/RGMII
    • 8- to the 16-bit camera interface, 3 Mpix at 30fps or 5Mpix at 1fps in color or monochrome with pixel clock at 120MHz (maximum frequency)
  • BGA 320 balls, 11mm x 11mm size, and 0.5mm ball pitch, packaging

Applications

  • Energy power
  • Industrial control
  • Industrial gateway
  • Industrial HMI
  • Embedded systems
  • Edge computing

Block Diagram

MYIR MYC-YF13X CPU & SOM Modules

Evaluation Board

MYIR MYD-YF13X Development Boards

Designed to unleash the full potential of the ST STM32MP135 Arm® Cortex®-A7 processor.

Learn More關於MYIR MYD-YF13X Development Boards View Products與MYIR MYD-YF13X Development Boards相關

Additional Resource

發佈日期: 2023-06-21 | 更新日期: 2026-08-31